Speedokote SMR-260G DTM Primer/Sealer Gray Paint Primers, 10 oz

<p>This&nbsp;sale is for a&nbsp;gallon of fast dry&nbsp;grey 2.1 lbs/gallon voc&nbsp;epoxy primer (SMR-260G)&nbsp;and a quart&nbsp;can of epoxy catalyst (SMR-261). The SMR-260 is 2.1 lbs/gallon voc and compliant everywhere.The SMR-260 is a fast dry, easy sanding 2K&nbsp;epoxy primer with great color and gloss holdout.- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR-0075)- Excellent adhesion and corrosion resistance - Can be used as a primer&nbsp;and a&nbsp;sealer- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes - Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075)- True 2K epoxy, no unreacted polymers SURFACE PREPARATIONS Clean surface with a Wax and Grease Remover. Sand metals or old paint with 180-220 grit and re-clean. SPRAY GUN SETUP HVLP Gun: Fluid Tip 1.3-1.6 mm, Spray Pressure 8-10 psi APPLICATION Epoxy Primer should be applied in medium wet coats, with a 10-minute flash period between each (at 70 °F). One to two coats is enough to achieve the desired dry film thickness. Epoxy primer may be topcoated after approximately 30 minutes per coat, or up to about&nbsp;3 days. After&nbsp;three days, the primer MUST be sanded prior to topcoat application. SAFETY This product was designed for and is intended solely for use by trained professionals. Read all &nbsp; warning statements and heed all recommended safety precautions before proceeding. &nbsp; DO NOT USE THIS SYSTEM WITHOUT SUFFICIENT VENTILATION. Users must wear appropriate, &nbsp; properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air &nbsp; system is not available. Always wear eye and face protection, as well as gloves and protective &nbsp; clothing. Do not use this product, or be exposed to spray mist / vapors if you have respiratory &nbsp; problems. KEEP OUT OF REACH OF CHILDREN AND PETS. &nbsp; This system comprises multiple components. Once mixed, this system will have hazards of all &nbsp; components. Read warnings on all packages before opening.</p>

Speedokote SMR-260G DTM Primer/Sealer Gray Paint Primers, 10 oz

• Excellent color and gloss holdout for a professional appearance
• Simple 4:1 mixing ratio with optional 5-10% reduction using 0 VOC reducer (SMR-0075)
• Provides excellent adhesion and corrosion resistance
• Versatile use as both a primer and a sealer
• Adheres well to a variety of surfaces including steel, aluminum, fiberglass, body fillers, and existing finishes